Reducing Energy Costs In A Warehouse Setting

While lighting a warehouse, it may appear that enormous utility costs are unavoidable. However, while most warehouses are massive structures with high lighting output requirements, there are still a few solid strategies to cut energy expenditures in a warehouse. 

Following are ways to assist you to save money on warehouse lighting without sacrificing the quality of light this site requires:

1. Dispose of any old metal halide lighting.

While metal halide systems were once the industry standard for warehouse lighting, they have been shown to be inefficient compared to other options. Metal halide solutions provide fewer lumens per kilowatt and require more maintenance than other options.

2. Replace metal halide bulbs with LED retrofits.

Fluorescent lighting uses 50% less energy than typical metal halide lighting and lasts twice as long, giving you a better return on your investment. 

Some metal halide units can be retrofitted for modern LED lighting, so you may not need to purchase new fixtures at all, just a LED retrofit kit.

3. Don't dismiss LEDs.

Many people believe that LED technology is only for use in businesses, although it can be used in almost any application. For example, LED lighting solutions like high bay LED lights are ideal for warehouses.

Even more so than fluorescents, these units can significantly reduce energy expenses in a warehouse scenario. LED lighting is the most energy-efficient option because it provides many lumens for a small amount of power. The bulbs are likewise long-lasting, and the fixture is powered by an internal driver that is unlikely to need replacing over the light's lifetime because LEDs produce little to no heat.

4. Install timers and light sensors.

Using only what you need, when you need it, is a terrific method to save money on energy. For example, if you leave lights on when they're turned off or leave lights on in places that aren't inhabited for most of the time, you're simply wasting money on energy you don't need. Instead, installing occupancy sensors and timers to turn off the lights at the end of the business day ensures that power is only consumed when needed. 

You can also add sensors that change the artificial lighting system based on the amount of natural light the room receives throughout the day, allowing you to achieve a better balance while conserving electricity.

Which is better, UFOs or Linear High Bays?

Selecting the correct one for better illumination is essential when choosing light fixtures for interiors with large spaces and high ceilings. The high bay LED lights are generally installed from a standard ceiling height and deliver optimal illumination downwards over the given space. As a result, the operational hours are more when compared to the conventional lights, and the brightness spreads uniformly throughout the floor. 

UFO High Bay lights

The UFO high bays look circular like an alien flying saucer from the sci-fi movies. They have a circular light panel and a compact driver on the top. The light fixtures are installed from the ceiling with the help of hooks and chains.

The round shape, robustly built, and power beam brings the fixture a durable appearance engaging in looks. In addition, they are compact and come with a better lifespan. The fin tail design helps to dissipate a small amount of heat. 

Areas of application

• Industrial warehouses

• Retail spaces

• Construction spaces

• Commercial bays

Linear High Bay lights

The linear high bays are mainly selected in place of traditional fluorescent tubes. If you are tasked with illuminating vast interiors, then linear high bays are a terrific choice for your interiors.  

The linear high bays have a more extended diode provision, providing a larger beam angle to the given area. Thus, the longer and broader is the LED lights, the better is the illumination. 

Areas of application

• Educational institutions

• Airport 

• Recreational centers

• Convention centers

Comparison

Light distribution - For linear high bays, the light distribution is rectangular, and for the UFO high bays, the light distribution is circular.

Linear high bays are an excellent choice for the corridors, warehouse shelves, and the UFO high bays deliver uniform circular brightness inside the warehouse.

Shape and beam size - Different fixture shapes project different beam sizes and shapes. For example, the UFO high bays have a conical beam (90 degrees to 120 degrees). As a result, the brightness is more focused on the given area.

On the other hand, the linear high bays deliver a rectangular beam that illuminates interior places like aisles and shelves. 

Conclusion

When both the luminaires are compared, the distribution of brightness is distinctive according to their shapes.

The choice also matters due to the design aesthetics of both luminaires. The high bays take less than a second to illuminate, and there is no issue of flicker.

One thing that cannot be overlooked is that these luminaires are cost-effective and save a lot of money for the facility managers over power consumption.

The high bays do not require regular maintenance and replacement and are designed to be fully efficient. As a result, they are an excellent choice for commercial interiors.

The Wrong Way to Use LED Flood Lights

Whenever you plan the layout of any outdoor project, there are many lighting options to choose from. The most energy-efficient are the ones equipped with LED technology. So why LED flood lights are selected for the exteriors? The main reasons are the quality of brightness and the operational lifespan they come with. This blog will discuss how you can enhance the lifespan of your flood lights with the correct ways to use them. 

Led Flood Lights

Operating the LED flood lights manually - A photocell sensor is required to control the illumination of the light fixture so they can be switched on and off automatically during nighttime and daytime. 

Photocell sensors are needed to install at the best angle to catch the natural daylight. Remember that you need to install the motion and photocell sensors separately on the fixture as both operate differently. 

The brightness is in the wrong position - Mounting outdoor flood light fixtures is no easy task. However, you can achieve more brightness by using fancier lighting techniques like moonlighting, where the fixture delivers soothing moonlight brightness to a given space.

The shadowing technique is wall whitewashing, which means that the focus of the object is in front of the wall. 

Too many lumens - Brightness is not always better for the provided space. You can use light fixtures with lower brightness, such as LED flood lights with lumen ranging from 5000 to 7000 are suitable for house exteriors. 

Save the 40,000-lumen intensity LED flood lights for stadium and arena use. 

The lights are at the wrong place - Installing the flood lights on the sides and rear of your house with added motion sensors provides security to your exteriors. 

The light fixtures are needed to be appropriately placed in the area with dark spots so that the space gets even brightness during the night. In addition, it is essential if there are security cams placed in that area. 

How to Buy LED High Bay Lights?

The lighting sector has grown fast since Thomas Edison pioneered electric light more than a century ago. Because of its energy-saving properties, environmental protection, and extended service life, LED (Light Emitting Diode) has become increasingly popular in many indoor and outdoor lighting settings in recent years.

In general, the illuminance achieved by the light is precisely proportional to the height of the fixture’s suspension. Therefore, if the lamp is set at too high a height, it will not meet the lighting requirements; on the other hand, if the light is installed at too low, the entire space will seem claustrophobic due to excessive brightness. As a result, we can use low-brightness LED bulbs or LED ceiling lights in our homes, although LED high bay lights are more commonly employed in commercial and industrial lighting.

How Do You Decide Which LED High Bay Lights to Purchase?

UFO or linear?

Linear high bay lights and UFO high bay lights are the two most common LED high bay lights. The appearance of UFO LED high bay lights and linear LED high bay lights is the most noticeable difference. The UFO LED high bay light has a spherical design, whereas the linear high bay light is rectangular.

Beam angle: UFO LED high bay lights to have at least a 120° beam angle, while linear LED high bay lights have a 110° beam angle, implying that the former's light will be more scattered and the latter's light will be more suited to installation in narrow aisles. Furthermore, the UFO LED high bay light's installation angle can be modified to set the beam angle. In contrast, the linear LED high bay light’s installation angle is fixed.

Installation method: Simply put, a UFO high bay light is suspended using a suspension ring or U-shaped brackets, but a linear LED high bay light is most commonly suspended using two chains.

Illuminance

We all know that individuals can only work and live in a pleasant atmosphere if the illumination is enough. Therefore, the Department of Labor in the United States establishes minimum illuminance requirements for various locations.

For example, the minimum illuminance need for interior warehouses and corridors is five FC; for general construction factories and shops, it is ten FC; and for emergency rescue stations and hospital rooms, it is thirty FC.

When buying LED high bay lights, it's a good idea to look over the lamp's documentation to verify if it meets the illuminance criteria.

Lumens and wattage

LED high bay lights are available in various wattages and brightness counts. In general, the efficiency of LEDs from different companies is not the same. And the brightness achieved by the same power is not always the same; therefore, the number of lumens must be considered when purchasing lamps.

Height of installation

The illuminance obtained when the same LED high bay lights are put at different heights is varied. Therefore, to select the appropriate lamp, you must first determine the size of the ceiling, and the approximate installation height of the LED high bay light you intend to purchase to determine if the illuminance supplied by the chosen lamp after installation will match your requirements.

Spacing

The spacing is determined by the area lighted by the LED high bay lights, which calculate the number of lamps required to illuminate the entire region. 

Professional lighting tools such as DIALux and AGI32 are also used to calculate the correct spacing.

Price

Price is, without a doubt, a critical consideration when making a purchase. However, LEDMyplae LED high bay lights are quite economical compared to other brands, especially when providing a quality guarantee. Moreover, with the variety of LED high bay lights available, each with varied wattage and brightness options, you can indeed find the best one for you.

The Best LED Light Fixtures for Gym Interiors

To create a perfect gymnasium interior, you need to attend to every detail with full attention. These are LED light fixtures used inside sports facilities, fitness centers, health spas, and more. The gymnasium lighting fixtures create a warm and welcoming environment and enhance the performance of the gym-goer. 

When any gym owner tries to plan a new lighting layout, there are many factors that one needs to consider. Some of these factors are the mounting level of the LED gym lights, color temperature, brightness distribution, etc. In addition, optimum LED lighting fixtures decrease electricity consumption and reduce maintenance costs. 

Exercising efficiency

Most of the light fixtures depend on the height of the ceiling. High bay LED lights are an excellent choice for gyms and health spas as the height requirement starts from 20 feet, and they are easy to install. 

You can also install optional sensors in the fixtures for better lumen efficiency. These light fixtures are guaranteed to meet your requirements.

Improved lumen quality

When it comes to natural lighting, LED lights do mimic the spectrum of natural sunlight. Therefore, the luminaries are pure and their true colors perfectly. 

The LED gym lights’ color rendering index (CRI) should be more than 85 to eliminate the shadows and uncomfortable glare.

Improved illumination at a low cost

It is an investment that is going to pay back in months. The LED lights will save more than 80% of energy and last 4 times longer than traditional light fixtures.

It also brings down the maintenance cost of the premises, and you are saving a lot of money on lamp replacements. Thus, you can enjoy accumulative profits each month while operating your gym in total efficiency. 

Durable light fixtures

The LED lights are designed in such a way that they can handle maximum wear and tear. The LED gym lights are compact, and heavy-duty lights are perfectly designed to withstand any kind of damage.

These fixtures do not have exposed wiring, which can decrease the work quality of the lights. 

Safety is the priority

Better illumination for the interiors means more minor injuries for the gym-goers. In addition, LED lights to come with superior brightness, which can help avoid fatigue and restlessness. 

The focused beam spreads of the LED lights deliver visual comfort and prevent shadows. A suitable lighting fixture will lessen the glare inside the premises and keep the gym members comfortable all the time.